Two doors that look similar on paper can land hundreds of dollars apart once labor, trim, paint, and opening conditions are factored in.
Small differences in prep and finish work tend to carry the biggest impact on price.
We'll break down real interior door installation costs in Salt Lake City, what's typically included, how different door types affect pricing, and where numbers usually shift.
Based on Salt Lake City projects, interior door installation costs typically fall into these ranges:
These numbers assume standard interior doors and exclude high‑end custom slabs. The biggest swing factor is how much prep and finish work the opening requires.
This is the lower end most homeowners hope for.
A light install usually means a:
One of our recent projects in Salt Lake City came in at around $575 total, including the door, hardware, trim removal and reinstall, and paint.
These installs are possible, but only when the opening is square, the jamb is intact, and nothing unexpected shows up once trim comes off.
This is the most common scenario.
Standard installs often include:
In Salt Lake City, these projects typically land between $850 and $950 per door, even with mid‑range materials.
Sometimes replacing the entire door isn't necessary. But repairs aren't always cheap either.
For example, replacing a damaged hinge‑side jamb, reinstalling the door, adding new trim on one side, and repainting can cost around $750–$800. At that point, repair pricing starts to overlap with replacement costs.
When repairs require trim removal, paint, and alignment work, full replacement often becomes the cleaner option long‑term.
Single swing interior doors are the baseline for pricing. Costs vary mostly by opening condition, not door style.
Expect:
Anything involving framing, drywall, or heavy paint pushes higher.
French doors change the equation quickly.
In one of our recent projects, installing French doors required widening and raising the opening, reframing, drywall repair, trim on both sides, and full paint.
Labor alone exceeded $1,050, with total project cost around $1,470.
French door installation cost is higher because you're no longer just installing doors.
You're modifying the structure around them.
When homeowners ask about the handyman cost to hang a door, they're often picturing a quick hinge job.
In reality, labor includes:
Even a "simple" door install can take several hours when finish quality matters.
These issues are usually invisible until work begins, which is why accurate on‑site quotes matter.
Door replacement cost usually ranges from $600 to $1,500+ per door, depending on whether the jamb, trim, paint, or opening size needs work. The door itself is often the smallest part of the total cost.
Handyman cost to hang a door typically starts around $300–$500 for slab-only installs, but full interior door installation with jambs, trim, and paint often reaches $800–$950 in Salt Lake City.
The labor cost to remove and install an exterior door and frame commonly falls between $850 and $1,200+, excluding the door. Weatherproofing, exterior trim, and alignment drive pricing higher than interior installs.
The cost to replace a sliding glass door often ranges from $1,200 to $3,500+, depending on door size, weight, framing condition, and whether interior and exterior trim or siding work is required.
Interior door installation cost in Salt Lake City isn't about picking a door and calling it a day.
Best-case installs can land around $550–$650 when the opening is clean and trim stays simple. Most standard installs fall closer to $850–$950 once jamb work, routing, trim, and paint are involved.
Repairs can still reach $750–$800, and projects like French doors or resized openings climb past $1,400 fast.
To get clear numbers that reflect your door, opening condition, and finish scope, the next step is to get your quote. It's the easiest way to understand what applies to your space and what doesn't before work begins.
These cost ranges are meant to give you a realistic starting point. Every home and project is different, and final pricing depends on layout, materials, prep work, and job complexity. We provide clear, upfront pricing after reviewing your specific project.